Air Bag Seat Canceller - Changing Seats (Advice Needed)

[bigbrian]

I am a bigger guy (250lb bodybuilder) with a very wide back. The OEM seats in my 2015 Huracan are a too narrow for me especially the bolsters up top. I ordered a set of Technocraft T5 seats that should work given they are wide and supposedly very comfortable (even though they don't look comfy lol).

I am looking for an Air Bag Seat canceller and I noticed BRIDE makes one but they doesn't specifically list Lamborghini although VW might work. Has anyone swapped out their OEM seats for aftermarket? If so which canceller did you go with?

Here are the seats...



Brian

[Shardul]

Send me an email I have the part number for Lamborghini SRS bypass plug from a SL with race seats. Or you can use a resistor between 2 pins so the seat occupancy sensor does not throw a SRS code

Shardul@ultimatepd.com

[bigbrian]

@Shardul - I just sent you an email.

I would need to know what ohms the resistor needs to be... Any idea?

[Shardul]

this should help. Parts used are the same for all EU cars.

HowTo: Build Seat Occupancy Bypass BMW Cheap - YouTube

[bigbrian]

this should help. Parts used are the same for all EU cars.

HowTo: Build Seat Occupancy Bypass BMW Cheap - YouTube

The resistance isn't the same for all EU cars. I believe the Huracan needs a 4.7ohm. I am now stuck on what to do with the passenger occupancy sensor. It's a gel bladder that needs to be removed from the seat itself as I cannot find a part number for it on any Lamborghini parts website and/or diagram.

Brian

[Shardul]

Can you use one from an Audi R8?
Or
Use LARA to code the car differently.

[bigbrian]

Where I am going to find LARA software besides the dealership I don't know.

[Shardul]

Usually an independent Lamborghini specialist show have one.

[Lambofan35]

Back from the dead...I’m new here but not to the forums. I wrote up a how to with details and pictures 5 years ago on how to put carbon fiber seats in a gallardo. I messaged bigBrian and we are going to try and get to the bottom of this. Stay tuned and post if you have interest as we may have to produce something to make this work.

[LAM80H]

I am also interested in this as I have am about to install the same seats.

Many thanks in advance for any help!