Results 1 to 5 of 5

Hybrid View

  1. #1
    Join Date
    May 2016
    Location
    Bay Area, CA
    Posts
    19

    Front Side markers, do they pop right out?

    Order me some euro spec front side markers.

    I was wondering if they pop right out by using hands or do I have to go into the fender liner and unbolt?

  2. #2
    Join Date
    Feb 2016
    Location
    Ohio
    Posts
    269
    I'm not 100% sure but I just had mine blacked out, was going for the euro ones too but they wanted way to much for BOTH front & rear sets & also I like the blacked out look anyway. I think my shop said they needed to remove the bumper to get them off though.
    "Go look at yourself in the mirror & say "I'm going to win, I'm going to do this & no one will stop me...Not even you" #GrindOrDie

    2015 Verde Mantis Huracan LP610 "Kryptonite"
    2014 BMW i8 "The DeathStar"

  3. #3
    Join Date
    Oct 2015
    Location
    Pittsburgh
    Posts
    4

    Front Side markers - Do Not Pop Out

    Quote Originally Posted by Venzz1028 View Post
    Order me some euro spec front side markers.

    I was wondering if they pop right out by using hands or do I have to go into the fender liner and unbolt?
    Hey Bud... Takes about 15 minutes per light.

    1) Low Profile Jack - remove wheel
    2) Star Wrench to remove the bolts inside wheel well - about 8 or so. Only the ones around the light.
    3) Pull back the liner
    4) Remove plug from side marker
    5) Remove two screws in side marker
    6) Replace light etc...

    Two things. 1) Pre-Thread the new light a few times.. Makes it easy to tighten. Don't forget to plug power back into clip.

    RK

  4. #4
    Join Date
    May 2016
    Location
    Bay Area, CA
    Posts
    19
    Quote Originally Posted by Ravi Kartan View Post
    Hey Bud... Takes about 15 minutes per light.

    1) Low Profile Jack - remove wheel
    2) Star Wrench to remove the bolts inside wheel well - about 8 or so. Only the ones around the light.
    3) Pull back the liner
    4) Remove plug from side marker
    5) Remove two screws in side marker
    6) Replace light etc...

    Two things. 1) Pre-Thread the new light a few times.. Makes it easy to tighten. Don't forget to plug power back into clip.

    RK

    thank you sir!

  5. #5
    Join Date
    Apr 2016
    Location
    Redlands, CA
    Posts
    44
    where is the best place to get those clear /white side markers for the front and back ?

    and can we put LED light bulbs into them w/o it setting of the car's lamp failure service light coming on ??

    tnx,

    jim R
    '16 LS580-2, white

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •