Results 1 to 5 of 5
-
06-01-2016, 11:51 PM #1
Registered User
- Join Date
- May 2016
- Location
- Bay Area, CA
- Posts
- 19
Front Side markers, do they pop right out?
Order me some euro spec front side markers.
I was wondering if they pop right out by using hands or do I have to go into the fender liner and unbolt?
-
06-02-2016, 12:01 AM #2
I'm not 100% sure but I just had mine blacked out, was going for the euro ones too but they wanted way to much for BOTH front & rear sets & also I like the blacked out look anyway. I think my shop said they needed to remove the bumper to get them off though.
"Go look at yourself in the mirror & say "I'm going to win, I'm going to do this & no one will stop me...Not even you" #GrindOrDie
2015 Verde Mantis Huracan LP610 "Kryptonite"
2014 BMW i8 "The DeathStar"
-
06-02-2016, 02:11 PM #3
Front Side markers - Do Not Pop Out
Hey Bud... Takes about 15 minutes per light.
1) Low Profile Jack - remove wheel
2) Star Wrench to remove the bolts inside wheel well - about 8 or so. Only the ones around the light.
3) Pull back the liner
4) Remove plug from side marker
5) Remove two screws in side marker
6) Replace light etc...
Two things. 1) Pre-Thread the new light a few times.. Makes it easy to tighten. Don't forget to plug power back into clip.
RK
-
06-05-2016, 10:15 PM #4
Registered User
- Join Date
- May 2016
- Location
- Bay Area, CA
- Posts
- 19
-
06-06-2016, 01:12 AM #5
Registered User
- Join Date
- Apr 2016
- Location
- Redlands, CA
- Posts
- 44
where is the best place to get those clear /white side markers for the front and back ?
and can we put LED light bulbs into them w/o it setting of the car's lamp failure service light coming on ??
tnx,
jim R
'16 LS580-2, white
Bookmarks