How do I program Garage Door Opener

[tomdfw1]

Thank you very much!

In my case - I have a Liftmaster (Chamberlain is same make) with the MyQ wall buttons (See picture: These have a small lcd screen and 4 buttons). These are the most common garage door openers available and been out for many years.

It was very easy to program my Huracan homelink buttons by:

1) Go to Liftmaster wall control unit and hit: Menu (See left wall unit in picture)
2) Scroll down to: Program (See right remote in pic)
3) Scroll to: Remote
4) Hit Enter
...The wall remote will then tell you to go to the car remote and push button for 2 seconds
5) Go to car and hold the Homelink button you want to open the garage. You will see the light on garagedoor opener flash

That is it!!

PS - If you don't have these wall unit remotes and instead have a single dumb button...it is easy to "upgrade" your garage door opener by just adding the wall unit and wiring it into your existing Liftmaster/Chamberlain garage door opener. They are about $35 on amazon. Liftmaster 880lm Smart Control Panel. These will also provide other nice features like automatically closing after x minutes...or turn light on automatically when senses motion...or if you get the base unit, it allows you to open/close/notified to open garage to/from phone anywhere in the world. This base unit must be purchased and then connected to your home network.