Page 3 of 3 FirstFirst 123
Results 21 to 30 of 30
  1. #21
    Join Date
    Jun 2017
    Location
    Wisconsin
    Posts
    11
    Unlocking in Dark no lights come on??
    Unlocking:


  2. #22
    Join Date
    Jun 2017
    Location
    Wisconsin
    Posts
    11
    Here are the screen shots of my settings:
    Unlocking in Dark no lights come on??-img_0780-jpgUnlocking in Dark no lights come on??-img_0781-jpgUnlocking in Dark no lights come on??-img_0782-jpgUnlocking in Dark no lights come on??-img_0783-jpgUnlocking in Dark no lights come on??-img_0784-jpgUnlocking in Dark no lights come on??-img_0785-jpg

  3. #23
    Join Date
    Jun 2017
    Location
    Wisconsin
    Posts
    11
    So here are the steps:

    1. Plug in OBD2 device
    2. Download Carista and pay for a 1 week subscription.
    3. Open the app
    4. Click on "customize"
    5. It will take a minute or 2 to read the ECU.
    6. After the meter hits 100%, click on "lights"
    7. Enter my settings.

    Make sure your auto headlights are on.
    I strongly recommend writing your settings down before making changes.

  4. #24
    Join Date
    Jan 2015
    Location
    Canada
    Posts
    185
    Wow - that was above and beyond. Thank you!

    My Carista thing arrives tomorrow. It's a small thing, but I can't wait. Can't stand not having something that the later Huracans have, hahaha.

    Thanks, bbywu - MUCH appreciated!!! Thank you for taking the time to put the DIY instructions together!
    __________________________________________________


    Anima sana in corpore sano

  5. #25
    Join Date
    Jun 2017
    Location
    Wisconsin
    Posts
    11
    No problem. If you have problems, post back. Again, I'd write down your settings before you change them. And for the setup to work, you have to have the auto headlights set to "on."

    There are a few other tricks it can do, including the side marker settings, etc.

  6. #26
    Join Date
    Jan 2015
    Location
    Canada
    Posts
    185
    I finally had some time to get this done. THANK YOU bbywu!!! Your instructions were perfect, and worked flawlessly. I bought and used the Carista OBD2 interface - they were offering a free months' subscription, so it was a no-brainer.
    Less than ten minutes after I plugged it into the OBD port, I had not only coming home and leaving home lights, but I was easily able to configure other little things that I preferred, over the standard settings.
    Best bang-for-the-buck mod that I have done in a very long time! Just having the coming home/leaving home lights was worth the purchase!

    Thanks again bbywu!!!
    __________________________________________________


    Anima sana in corpore sano

  7. #27
    Join Date
    Feb 2019
    Location
    Uk
    Posts
    3
    Great thread and very useful indeed. I got the carista too.

    When you activate follow home lights is it the DRL that comes on or the headlight? I only get the headlights.

    Also are all configurable options accessible through Carista or are there any other apps you guys can recommend that unlock more configuration options?

    Thanks in advance.

  8. #28
    Join Date
    Dec 2019
    Location
    Washington DC
    Posts
    14
    Perfect something for me to look into.

  9. #29
    Join Date
    Aug 2020
    Location
    Oregon
    Posts
    2
    That’s what I am getting too. Wondering the same thing if I can get the DRL to light up as well.

  10. #30
    Join Date
    Feb 2018
    Location
    Other/None
    Posts
    3
    I managed to figure it out! I have a 2015 LP610-4. Using Carista, I was also only able to get the "low beams" to turn on and not the DRL Led's like the newer Huracans.

    The solution is to use a more advanced coding software VCDS. This is what I bought (VCDS & VCDS-Mobile with HEX-NET Enthusiast | Ross-Tech). They did not sponsor me. Most shops have this software, so you can ask around to get access. I'm sure that other software like OBD11 would work also.

    The instructions for VCDS:
    1. Open Controller (09-Cent.Elect.)
    2. Click “Coding”
    3. On the new window, press the up arrow until “6” [seen in the screenshot below]
    - “Check” Coming home light
    - "Check” Leaving home light
    - “Check” Coming/leaving home with side marker/parking light active
    - “Check” Coming/leaving home with fog lights active
    4. Close the window and click “do it”

    (I had my engine running because I live in a condo, otherwise the battery would die)

    Here is what this looks like in action:


    What it looked like before:
    Unlocking in Dark no lights come on??-setup-jpg

    Screenshot:
    Unlocking in Dark no lights come on??-coding-screenshot-jpg

    If anyone has any questions, shoot me a DM on Instagram @watch.game
    IG: @watch.game
    Huracan LP-610-4
    Audi RSQ8
    BMW M6 F12 (Sold)
    McLaren 570s (Sold)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •