Ppl Who Lowered Huracan PLZ

[Hitz101]

I am planning the mods for Kryptonite (my H) & was just looking at images of Hs lowered on the Novitech springs & realized something...The front is SUPER low after lowering.

So my question is then..if you have the lift system option (which all of us should) after you lower the H & activate the H lift option dosent the lift roughly just lift the front up to about its normal stock height?

Worried about this because if so I won't be able to lower it as my driveway has a steep first up turn & it won't make it now stock height without the lift up. With the lift its fine but I tried with no lift & it won't work.

So then I'm thinking I'm screwed rite? No lowering for me eh? Or after you lower your H on the springs does the lift system still lift it up pretty high & still HIGHER than its normal stock front height?


Sent from my iPhone using Tapatalk

[Chary]

my buddy lowered his and just driving down the freeway it scrapes on every dip it's annoying, I want to lower mine but dont want to have that problem


Sent from my iPhone using Tapatalk

[Hitz101]

my buddy lowered his and just driving down the freeway it scrapes on every dip it's annoying, I want to lower mine but dont want to have that problem


Sent from my iPhone using Tapatalk

Wow really? Forget that what the heck.

[richardw331]

I am lowering mine with Novitec Springs - Adaptable for the Lifting System which i have.

You can adjust the height you drop it. The trick is what setting to set the springs before you install. It may take a couple of times or maybe 3 times installing to get it what im happy with.

Likewise with yourself, i only want a mild drop to remove the arch gaps & still be able to get around.

If you lowering it on its fullest setting, then yes, every dip in the road you'd probably scrap haha

[PCJR]

If you have stock wheel be sure to get their wheel spacers. Makes a big difference in looks!

[Hitz101]

If you have stock wheel be sure to get their wheel spacers. Makes a big difference in looks!

Hey, do you mean if you lower it or even at stock springs? Im on stock wheels now but just today put in a order for some ADV1s matte black gloss black & verde mantis green same size as stock wheels to fit stock OEM tires as well.

[PCJR]

You should not need spacers with after market wheels. Just be sure to specify a flush to the fender fitment. The Novitec spacers are 11mm per wheel and do a perfect job of pushing the factory wheels out to be flush.
Which Adv wheels did you order?

[Hitz101]

You should not need spacers with after market wheels. Just be sure to specify a flush to the fender fitment. The Novitec spacers are 11mm per wheel and do a perfect job of pushing the factory wheels out to be flush.
Which Adv wheels did you order?

Okay thank you! Also I just ordered a set of ADV1 005 M2 SL with 50 50 hardware (less bolts) all matte black with the inner flange lip painted verde mantis & adv1 logo also. I'll make a new post when I get it all done & back to me finally in a couple.

[Hitz101]

I am lowering mine with Novitec Springs - Adaptable for the Lifting System which i have.

You can adjust the height you drop it. The trick is what setting to set the springs before you install. It may take a couple of times or maybe 3 times installing to get it what im happy with.

Likewise with yourself, i only want a mild drop to remove the arch gaps & still be able to get around.

If you lowering it on its fullest setting, then yes, every dip in the road you'd probably scrap haha

Thanks for the info I did not know you could adjust how low or high you lower with the Novitech I thought it was just install & thats what you get. That helps a lot. Let me know how yours ends up please & post some images & post in this message letting me know too to check you out!

[Hitz101]

I am lowering mine with Novitec Springs - Adaptable for the Lifting System which i have.

You can adjust the height you drop it. The trick is what setting to set the springs before you install. It may take a couple of times or maybe 3 times installing to get it what im happy with.

Likewise with yourself, i only want a mild drop to remove the arch gaps & still be able to get around.

If you lowering it on its fullest setting, then yes, every dip in the road you'd probably scrap haha

Can you chime back in? Did you mean your doing the HR with stock coils setup they are talking about? You said novitech & we all thought they were not adjustable at all those were just 1 set height & thats it?