hi guys!

Okay today iam a bit worried,
My huracan has got a bt more than 3000miles of driving with this ratio:
70% of hard sport Use in the mountain especially
20% on street or autobahn in strada mode
10% on race track condition on the nurburgring (which is not a track where brake has a lot of solicitation and it was a very cold weather when i came)

I changed my brake pads (front and rear) just few weeks ago, rear was ok (50%) but front used at 80%, this is normal to do after this kind of use, no problem.

I followed the instruction from Brembo who say that after the first changing brake pads i must control the thickness of the rotor (front and rear) with a special micro milimeter tool and then that's what i did and i was very surprise lf the result!

Here you have:
Front rotor thickness: 37.87mm
Minimum thickness (marked on the disc) is: 37.30mm

Rear rotor thickness: 31.85mm
Minimum thickness: :31.60mm

What i can say is today iam very happy of the braking, no problem, noise etc... The system just work very well.

But If i follow the indication from brembo, we should replace the rotor 0.20mm after the minimum (so front at 37.50mm and rear at 31.80mm) regarding to the result of rear brake rotor i should replace them very soon!
That is a bit estrange nope?

Please give me your opinion about that.